Product Overview
The Emmeti Control T Actuator Head 230V has been developed and built around a sensitive wax/copper element, allowing for a more responsive operation. The Emmeti Actuator includes a pop-up indicator to show when the valve is open. This is commonly used when installing and maintaining a system.
The Control T actuator works by opening when the signal from the thermostats requests heat, this usually happens through a wiring centre. Once energised the actuator open and the pump and boiler fired. When an actuator opens this allows water to pass through into that required loop. When a room reaches temperature, the thermostat will stop calling for heat, which will, in turn, close the actuator.
The Emmeti Control T Head is fitted to the underfloor heating return bar on the manifold. This actuator will fit most underfloor heating manifolds, such as Maincor, Omnie, Komfort, Ivar, Robben, Emmeti and Reliance/JG.
Emmeti Control T Actuator Head Features
- 230v 2 Wire Normally Closed
- Pop-up Indicator
- IP40
- 3.6mm Stroke
- 1m PVC Cable
- M30 x 1.5 ring nut PA 66
- Polycarbonate casing
- Stainless Steel Ring
- MPN – 01213242
Emmeti Control T Actuator Head is compatible with – EWC1 and any other 230v Wiring Centre.
Reviews
There are no reviews yet.